4K DigitalMedia 8G+ Transmitter 302

• Receiver/Transmitter Cable Type - HDMI
• Receiver/Transmitter Cable Type - Twisted Pair
• Receiver/Transmitter Cable Type - Other
• Receiver/Transmitter Format Type - DVI
• Receiver/Transmitter Format Type - HDMI
• Receiver/Transmitter Format Type - IR
• Receiver/Transmitter Format Type - RS-232
• Supported Resolution - 1080p (1920x1080)
• Supported Resolution - 2K (2048x1080)
• Supported Resolution - 4K (4096x2400)
• Supported Resolution - HD (1366x768)
• Supported Resolution - UXGA (1600x1200)
• Supported Resolution - WQXGA (2560x1600)
• Supported Resolution - WUXGA (1920x1200)
• Supported Resolution - Other

• Operating Temperature (Maximum): 104 F
• Operating Temperature (Minimum): 32 F
• Transmission Range: 330 ft
• Signal to Noise Ratio: 90 dB
• AC Voltage (Maximum): 240 Volts
• AC Voltage (Minimum): 100 Volts
• Current Draw: 0.75 Amps
• DC Voltage: 24 Volts
• Depth: 1.08 in
• Height: 11.02 in
• Width: 5.35 in
• Product Weight: 1.48 lbs
• Regulatory Compliance: HDCP
• Color: Black
• Audio:
  ?Switcher:3x1 with auto-detecting digital/analog inputs and analog audio breakaway
  ?Input Signal Types: HDMI (Dual-Mode DisplayPort compatible [6]), analog stereo
  ?Output Signal Types: DM 8G+& HDBaseT, HDMI
  ?Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
  ?Analog Formats: Stereo 2-channel
  ?Analog-To-Digital Conversion: 24-bit 48 kHz
  ?Analog Input Level Compensation: ±10 dB
  ?Analog Performance:
  ?Frequency Response: 20Hz to 20kHz ±0.5dB
  ?S/N Ratio: >90dB, 20Hz to 20kHz A-weighted
  ?THD+N: <0.05% @ 1kHz
  ?Stereo Separation: >90dB
• COMMUNICATIONS:
  ?Ethernet: 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
  ?USB: Supports signal extension of USB HID class devices, supports a TT-100 series cable caddy[7], supports computer console (for setup)
  ?RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
  ?IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud
  ?DigitalMedia: DM 8G+, HDCP 2.2, EDID, CEC, PoDM+ [3], Ethernet
  ?HDBaseT: HDCP 2.2, EDID, CEC, RS-232, PoH [3], Ethernet
  ?HDMI: HDCP 2.2, EDID, CEC
  NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI devicesand a control system
• Connectors:
  ?VGA IN: (1) HD15 female, analog VGA/RGB/video input
  Signal Types: VGA, RGB, component, S-Video, or composite [5]
  Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL
  Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration
  Input Impedance: 75 Ohms
  Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr, Y/C, composite
  Sync Input Level: 3 to 5 Vp-p
  Sync Input Impedance: 510 Ohms
  ?AUDIO IN: (1) 3.5 mm TRS mini phone jack
  Unbalanced stereo line-level audio input
  Input Level: 2 Vrms maximum
  Input Impedance: 10k Ohms
  ?HDMI IN 1 – 2: (2) 19-pin Type A HDMI female
  HDMI digital video/audio inputs
  (DVI & Dual-Mode DisplayPort compatible [6])
  ?DM OUT: (1) 8-pin RJ45 female, shielded
  DM 8G+ output, HDBaseT compliant
  PoDM+ PD (Powered Device) port [2,3]
  Connects to the DM 8G+ input of a DM switcher, receiver, or other DM device, or to an HDBaseT device, via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable[1]
  ?24VDC 0.75A:(1) 2.1 x 5.5 mm DC power connector
  24 Volt DC power input
  PW-2407WUpower pack included
  ?Ground:(1) 6-32 screw, chassis ground lug
  ?USB HID:(1) USB Type A female
  USB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device (USB signal extension & routing), or for connection of a Crestron TT-100 series device (Crestron Connect It)[3,7]
  ?COMPUTER: (1) USB Type B female
  USB 2.0 device port for computer console (setup), or for connection to a computer or other USB HID-compliant host (USB signal extension&routing)
  ?LAN:(1) 8-pin RJ45 female
  10Base-T/100Base-TX Ethernet port
  ?HDMI OUT: (1) 19-pin Type A HDMI female
  HDMI digital video/audio output (DVI compatible [6])
  ?COM: (1) 5-pin 3.5mm detachable terminal block
  Bidirectional RS-232 port
  Up to 115.2k baud, hardware and software handshaking support
  ?IR: (1) 2-pin 3.5mm detachable terminal block
  IR/Serial port
  IR output up to 1.1 MHz
  1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
• Controls & Indicators :
  ?VGA IN: (1) Green LED, indicates video signal presence at the VGA input
  ?HDMI IN 1 – 2: (2) Green LEDs, each indicates HDMI signal presence at the corresponding HDMI input
  ?DM OUT: (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
  ?24VDC: (1) Green LED, indicates operating power supplied via PoDM+ or local power pack
  ?LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
  ?HDMI OUT: (1) Green LED, indicates HDMI signal presence at the HDMI output
  ?SETUP: (1) Red LED and (1) recessed pushbutton for Ethernet setup
  ?RESET: (1) Recessed pushbutton for hardware reset
• Power Requirements:
  ?Power over DM (PoDM): PoDM+ PD (Powered Device), capable of being powered by a PoDM+ PSE (Power Sourcing Equipment), conforms to IEEE 802.3at Type 2 [8]
  PoDM+ Class 4 (25.5 W) if supplying power to a USB device via the USB HID port
  PoDM Class 3 (12.95 W) with no USB device connected to the USB HID port
• Enclosure:
  ?Chassis: Metal, black finish, with (2) integral mounting flanges; vented top, front, and bottom
  ?Mounting: Freestanding, surface mount, or attach to a single rack rail
• Humidity: 10% to 90% RH (non-condensing)
• Heat Dissipation: 34.4 BTU/hr