DigitalMedia 4K60 4:4:4 HDR Network AV Encoder/Decoder with Downmixing

• Decoder or Encoder Signal Type - Audio
• Decoder or Encoder Signal Type - Video
• Decoder/Encoder Type - Other

• Operating Temperature (Maximum): 104 F
• Operating Temperature (Minimum): 32 F
• AC Voltage (Maximum): 240 Volts
• AC Voltage (Minimum): 100 Volts
• Active Power: 35 Watt
• Depth: 1.50 in
• Height: 8.61 in
• Width: 9.27 in
• Product Weight: 2.01 lbs
• Regulatory Compliance: HDCP
• Certifications: UL, CE, FCC
• Current Draw: 2 Amps
• DC Voltage: 24 Volts
• Encoding/Decoding:
  •Video Compression: JPEG 2000
  •Video Resolutions: Up to 4096x2160 at 60Hz (DCI 4K60), 4:4:4 color sampling, HDR10 and Deep Color support
  •Audio Formats: Primary multichannel (up to 8-channel LPCM or encoded HBR 7.1 surround sound), secondary 2-channel LPCM
  •Bitrates: 100 to 990Mbps
  •Streaming Protocols: RTP, RTSP, SDP
  •Container: MPEG-2 transport stream (.ts)
  •Session Initiation: Multicast via RTSP
  •Copy Protection: HDCP 2.2, AES-128, PKI
• Video:
  •Input Signal Types: HDMI with HDR10, Deep Color, and 4K60 4:4:4 support (Dual-Mode DisplayPort and DVI compatible)
  •Output Signal Types: HDMI with HDR10, Deep Color, and 4K60 4:4:4 support (DVI compatible)
  •Switcher: 3x1 manual or auto-switching, limited audio breakaway, Crestron QuickSwitch HD™ technology
  •Scaler: 4K60 4:4:4 video scaler with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, HDR10 support, widescreen format selection (zoom, stretch, maintain aspect-ratio, or 1:1), video wall processing up to 8 wide x up to 8 high, static or dynamic text overlay
  •Copy Protection: HDCP 2.2
• Audio:
  •Input Signal Types: HDMI (Dual-Mode DisplayPort compatible), analog stereo
  •Output Signal Types: HDMI (multichannel pass-through or 2-channel downmix), analog stereo (2-channel downmix)
  •Digital Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels
  •Analog Formats: Stereo 2-channel
  •Analog-To-Digital Conversion: 24-bit 48kHz
  •Digital-To-Analog Conversion: 24-bit 48kHz
  •Analog Performance:
  •Frequency Response: 20Hz to 20kHz +/-0.5dB
  •S/N Ratio: >95dB 20Hz to 20kHz A-weighted
  •THD+N: <0.005% at 1kHz
  •Stereo Separation: >90dB
  •Analog Output Volume Adjustment: -80 to +20dB
• COMMUNICATIONS:
  •Ethernet: 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1x, IPv4, Active Directory authentication, variable Multicast TTL, HTTPS web browser setup and control, Crestron control system integration
  •USB: USB 2.0 host or device signal extension and routing USB 2.0 computer console (for setup)
  •RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system) computer console (for setup)
  •IR/Serial: 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system)
  •HDMI: HDCP 2.2, EDID, CEC
  •DM NVX (via Ethernet): HDCP 2.2, AES-128 AV content encryption with PKI authentication, RTP, RTSP, SDP, ONVIF, IGMPv2, IGMPv3, SMPTE 2022, FEC (Forward Error Correction)
• Connectors:
  •USB DEVICE: (1) USB Type B connector, female
  •USB 2.0 device port
  •USB signal extender port for connection to a computer or any other USB 2.0 host
  •USB HOST: (1) USB Type A connector, female
  •USB 2.0 host port
  •USB signal extender port for connection of a mouse, keyboard, or any other USB 2.0 device
  •Available Power: 500 mA at 5 Volts DC
  •LAN 1: (1) 8-pin RJ45 connector, female
  •10Base-T/100Base-TX/1000Base-T Ethernet port
  •PD (powered device) port compatible with Crestron DM-PSU-ULTRA-MIDSPAN or approved third-party PSE
  •LAN 2: (1) 8-pin RJ45 connector, female
  •10Base-T/100Base-TX/1000Base-T Ethernet port
  •LAN 3: (1) SFP port
  •Accepts one Crestron SFP-1G series SFP transceiver module
  •HDMI OUTPUT: (1) HDMI Type A connector, female
  •HDMI digital video/audio output (DVI compatible)
  •HDMI INPUT 1 – 2: (2) HDMI Type A connectors, female
  •HDMI digital video/audio inputs (DVI and Dual-Mode DisplayPort compatible)
  •AUDIO I/O: (1) 5-pin 3.5 mm detachable terminal block
  •Balanced/unbalanced stereo line-level audio input or output
  •Input Impedance: 24k Ohms balanced/unbalanced
  •Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced
  •Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced
  •Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
  •CONSOLE, SERIAL: (1) 8-pin RJ45 connector, female
  •RS-232 computer console port (for setup)
  •CONSOLE, USB: (1) USB Type B connector, female
  •USB 2.0 computer console port (for setup)
  •IR 1 - 2: (1) 4-pin 3.5 mm detachable terminal block
  •Comprises (2) IR/Serial ports
  •IR output up to 1.1 MHz
  •1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
  •IRP2 emitter sold separately
  •COM: (1) 5-pin 3.5 mm detachable terminal block
  •Bidirectional RS-232 port [10]
  •Up to 115.2k baud, hardware and software handshaking support
  •24VDC 2.0A: (1) 2.1 x 5.5 mm DC power connector
  •24 Volt DC power input
  •PW-2420RU power pack included
  •G: (1) 6-32 screw
  •Chassis ground lug
• Controls and Indicators:
  •TX: (1) Green LED, indicates unit is in transmitter (encoder) mode
  •RX: (1) Green LED, indicates unit is in receiver (decoder) mode
  •OL: (1) Green LED, indicates an online connection to a control system via Ethernet
  •LAN 1 - 2: (4) LEDs, green indicates Ethernet link status, amber indicates Ethernet activity
  •LAN 3 LNK: (1) Green LED, indicates Ethernet link status
  •LAN 3 ACT: (1) Green LED, indicates Ethernet activity
  •HDMI OUTPUT: (1) Green LED, indicates video signal transmission at the HDMI output
  •HDMI INPUT 1 - 2: (2) Green LEDs, each indicates sync detection at the corresponding HDMI input
  •PWR: (1) Bi-color green/amber LED, indicates operating power supplied via the power pack or injector/PSE, illuminates amber while booting and green when operating
  •SETUP: (1) Red LED and (1) recessed pushbutton for onscreen IP address display and to change between TX and RX modes
  •RESET: (1) Recessed pushbutton for hardware reset
  •INPUT SEL: (1) Pushbutton for manual input selection and (2) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding input
• Power:
  •Power over LAN: Compatible with the following PSEs:
  •Crestron DM-PSU-ULTRA-MIDSPAN for 2 DM NVX endpoints
  •Microsemi® PD-9500G Family Gigabit EEPoE Midspans as follows:
  •PD-9506G for 6 DM NVX endpoints
  •PD-9512G for 10 DM NVX endpoints
  •PD-9524G for 20 DM NVX endpoints
• Enclosure:
  •Chassis: Metal, black finish, integral mounting flanges, fan cooled, vented top, front, bottom, and sides
  •Mounting: Freestanding, surface mount, or attach to a single rack rail

CNSP-XX
Custom Serial Interface Cable

DM-XIO-DIR-ENT
DigitalMedia XiO Director Virtual Switching Appliance, Enterprise Version

IRP2
IR Emitter Probe

PW-2420RU
2.1mm 24VDC/2.5A Universal Desktop Power Pack