A high-power, high-efficiency 2-channel power amplifier offering excellent sound quality for use with Crestron Avia™ DSPs and Vector™ performance loudspeakers.
A 2-channel power amplifier with up to a total of 1600W at 4-ohms - ideal for small to medium-scale installs. Excellent sound quality and ample output power result from Powersoft's unique approach to Class D amplification, making the Duecanali 1604 Power Amplifier ideal for the main system in any venue where performance and clarity is priority.
The Duecanali 1604 is versatile, with easy setup and control provided via a fully tested Crestron control module. Powersoft's legendary efficiency saves valuable energy, keeping both operational cost and ‘carbon footprint’ at a minimum.
The Duecanali 1604 is designed to work with lo-Z (from 2-ohm), 70V/100V distributed lines, or a mix. Its universal switch mode power supply features Power Factor Correction and Low Inrush Limiting. A fixed frequency switch mode output stage achieves highly accurate sound quality.
Network port for control
Compact 1 RU form factor
800W per channel at 70 or 100V
800W per channel at 8 or 4-ohms
High performance 2-channel power amplifier
Pairs perfectly with Crestron Avia™ DSPs and Vector™ performance loudspeakers
Fully tested Crestron compatibility via the Powersoft module from the Crestron application market
Amplifier Type - Power Amplifier
Number of Channels:
Number of Watts Per Channel:
Rack Units (Height):
AC Voltage (Maximum):
AC Voltage (Minimum):
•Output power, Single channel mode: 1000W at 2-ohm, 800W at 4-ohm and 800W at 8-ohm •Output power, Distributed line: 800W at 70V, 800W at 100V •Output power, Bridge mode: 2000W at 4-ohm, 1600W at 8-ohm •Maximum output voltage/current: 115Vpeak/45 Apeak
AC Main Power:
•Power supply: Universal, regulated switch mode with PFC (Power Factor Correction) •Inlet: IEC C20 (20A maximum)
•Selectable Gain/Sensitivity (8-ohm): 26dB, 4.08Vrms, 29dB, 2.89Vrms, 32dB, 2.04Vrms, 35dB 1.45Vrms, 26dB recommended for use with Crestron Avia DSP’s FS out •Maximum input level: 20dBu •Crosstalk separation: <70dB at 1kHz •IMD: < 0.05% from 0.1W to full power (typically <0.05%) •Input impedance: 20-kohm balanced •Slew rate: >50 V/us at 8-ohm, input filter bypassed •Damping factor: > 500 at 20 to 100Hz (8-ohm) •Amplifier: Class D
•Wired: Ethernet 100 Mbit/s via RJ45 port
- 2x210W Commercial Power Amplifier, 4/8 ohm or High-Power 70V