The product of expert Crestron® audio engineering, Aspire® speakers deliver high-end performance for demanding residential installations. Select materials and a refined appearance underscore the meticulous design behind each model. The result is a complete line of in-wall and in-ceiling speakers worthy of a place in every room of the finest custom home.
The Aspire line strikes a perfect balance between performance and price, delivering pristine, impactful sound quality, with minimal impact on your décor thanks to paintable zero-bezel grilles. Streamlined installation of each speaker is facilitated through a spring-loaded toggle clamp mounting system.
The Aspire IWLCR52 model provides a 2-way in-wall speaker designed for home theater and other demanding applications. It features dual 5-1/4 inch woven poly-glass composite woofers and a 1 inch advanced synthetic polymer dome tweeter for clear dialogue and rich, impactful music and sound effects. It’s precisely tuned 4th order crossover ensures smooth, detailed response across the spectrum. Power handling is an impressive 150 Watts (program), with a wide frequency response from 80Hz to 20 kHz (+/-3 dB).
The Aspire IWLCR52 can be installed horizontally with the tweeter positioned at the top or bottom, allowing for use as a center channel speaker mounted above or below the video screen, or as a surround sound speaker mounted near the ceiling. It can also be installed vertically with the tweeter positioned to either side, allowing a pair to be used in a left/right channel configuration. Whether installed horizontally or vertically, the Aspire IWLCR52 fits cleanly in a standard 2x4 framed walls with studs spaced 16 inches on-center.
Audiophile performance 2-way in-wallLCR speaker
Designed for home theater left, center, and right channels
Also suitable for stereo and surround channel applications
Supports horizontal orientation with tweeter positioned at top or bottom
Supports vertical orientation with tweeter positioned to left or right
Either orientation fits in a 2x4 framed wall with 16 inch o.c. stud spacing
Tweeter:0.98 inch (25 mm) advanced synthetic polymer dome, ferrofluid cooling
Crossover Frequency:2 kHz
Frequency Range:49Hz to 20 kHz (-10 dB)
Input:(2) spring terminals
Maximum Wire Size: 10 AWG
Humidity:10% to 90% RH (non-condensing)
For indoor use only
Baffle:ABS plastic, black
Grille:Steel with white textured finish, paintable, magnetically-held “zero-bezel” frameless design
Mounting:Flush wall mount using eight integral spring-loaded toggle clamps, 1.35 in (34 mm) maximum surface thickness, 3.25in
(83mm) minimum mounting depth, 7.25 in (184 mm) x 13.25 in (336 mm) recommended cutout
Crestron warrants to the original end purchaser that this Crestron Speaker Product, when purchased directly from Crestron or an
authorized Crestron Dealer, will be free from defects in material and workmanship for the life of the product except for speaker grills
and outdoor rated speakers, which are warranted for five (5) years. Crestron will at its option and expense either repair the defect or
replace the Speaker Product with a new or remanufactured Product or a reasonable equivalent. In cases where a new model is
substituted, a modification to the mounting surface may be required. If mounting surface modification is required, Crestron assumes
no responsibility or liability for such modifications.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales
representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.
Crestron, the Crestron logo, and Aspire are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United
States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to
either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and
names of others.Crestron is not responsible for errors in typography or photography.Specifications are subject to change without